For:
VITA vPad excellence beginning with serial number 2320152050 through serial number 2321000000
VITA vPad comfort beginning with serial number 2420155636 through serial number 2421000000  

VITA Zahnfabrik offers serial number-specific software updates for the devices of the above mentioned series.
For this reason, you should check your serial number directly on the system before performing a software update.
Please do not conduct the software update unless the serial number of your vPad is within the indicated range.

Software update version 180208 beginning with serial number 2820170050 through serial number 2321000000

Software update version 180208 from serial number 240155636 through serial number 2421000000

The software updates refer to the systems specified above and have been provided in generation-specific versions, due to extensive hardware and software changes. At IDS 2015, several software features from the prior model generation were introduced that could not be implemented on models from the above-mentioned series, due to specific hardware incompatibility. If you are interested in upgrading to the new software and hardware features, you can do so at any time by purchasing the latest generation of equipment, such as the control unit. The new control units are easy to install with dental furnaces from the series mentioned above and the generation prior to IDS 2015. 

Contents of software update 180208 for VITA vPad excellence and VITA vPad comfort:

General:
Polish is available again
Display of the firing program name corrected in the firing program

Materials / firing program:
New sintering programs for YZ ST + YZ XT have been added for material YZ
Former pre-dry sintering curves have been consolidated into a Pre-Dry SOLUTIONS sintering curve

Competitor materials:
Celtra Duo, Celtra Press + Celtra Ceram materials have been added
IPS e.max ZirCAD – stain/glaze firing materials have been added
Adjusting IPS e.max CAD/CAD-on + IPS Empress CAD program names
IPS e.max ZirCAD and Celtra Duo are now stored in Doc profile

In order to keep the updates clear, there is an applicable furnace update for every vPad update associated with the same software version number. Software update 180208 does not contain any content change for the furnaces. Therefore, the current furnace version number is simply increased.

VITA recommends performing software updates in order to ensure smooth operation of your systems.

Should you have any questions or comments regarding the software updates, please call VITA Equipment servicing:
Telephone numbers: +49 7761 562, ext. 101, 105, 106 or 114
email: instruments-service@vita-zahnfabrik.com.