VITA ENAMIC multiColor is the hybrid ceramic blank for reproduction of the natural shade gradient at the push of a button. This CAD/CAM blank has an integrated shade gradient from cervical to incisal area.
VITA ENAMIC® multiColor
CAD/CAM blank made of hybrid ceramics
Features/Benefits
- fabricating durable restorations using a high-load capacity hybrid ceramic with absorption of masticatory forces
- non-/minimally invasive restorations possible since the elastic hybrid ceramic enables reduced wall thicknesses
- fabricating accurate, precise and delicate restorations using a hybrid material with integrated elasticity
- cost-effective reconstruction, thanks to time-saving CAM fabrication and efficient polishing without any firing process
Recommended indications*
- esthetic crown restorations with vivid play of color/light
- delicate (non-prep) veneers for cosmetic reconstructions
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products.
Shades
VITA SYSTEM 3D MASTER®, high translucent (HT)
1M1, 1M2, 2M2, 3M2, 4M2
Geometry
Blocks (mm):
- EMC-14 (12 x 14 x 18)
- EMC-16 (18 x 16 x 18)
VITAVM®LC
Light-curing, microparticle composite for extraoral use with fixed and removable restorations
VITA AKZENT® LC
Reliable reproduction of individual shade effects
VITA ENAMIC® Polishing Set
For simple pre- and high-gloss polishing of VITA ENAMIC hybrid ceramic
VITA ADIVA® FULL-ADHESIVE
The full-adhesive luting system with perfectly matched components for conditioning tooth substance and restorative material
VITA ADIVA® SELF-ADHESIVE
The self-adhesive luting system with perfectly matched components for conditioning the restorative material
VITA ENAMIC multiColor – SYSTEM SOLUTIONS*
VITA offers VITA ENAMIC multiColor with specific holder systems for the CAD/CAM systems:
- CEREC/inLab (Dentsply Sirona)
- PlanMill 40/PlanMill 40S (Planmeca)
- Ceramill mikro IC/Ceramill Motion 2 (Amann GirrbachAG)
- TS150 (Glidewell Laboratories)
- KaVo ARCTICA/Everest (KaVo Dental GmbH)
- MyCrown Mill (FONA Dental s.r.o.)
VITA ENAMIC multiColor – UNIVERSAL SOLUTIONS*
VITA offers VITA ENAMIC multiColor with universal holder system for the CAD/CAM systems:
- CORiTEC Serie (imes-icore GmbH)
- Röders RXD Serie (Röders GmbH)
- DGSHAPE DWX Serie (DGSHAPE Corporation)
- CS 3000 (Carestream Dental, Inc)
- Zfx Inhouse5x (Zfx GmbH)
- Milling UNIT M Serie (Zirkonzahn S.r.l.)
- N4/R5/S1/S2/Z4/R5 (vhf camfacture AG)
- Organical Desktop Serie (R+K CAD/CAM Technologie GmbH)
- DMG ULTRASONIC-Serie (DMG Mori AG)
Note: VITA ENAMIC DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove).
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Easy download for multiple documents
Download a .zip file containing all the selected files in a single step.Simply tick the files then click here.
Register for MyVITA now
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now